VALVE COVER ADAPTOR Ford Perimeter Bolt 429 460 Cover on Center Bolt EFI Heads

Description

1/2 INCH
THICK BILLET ALUMINUM
VALVE COVER CONVERSION ADAPTOR Ford Perimeter
Bolt 429 460 Cover On Center Bolt EFI Heads
Use to put 429 460 Perimeter Bolt Valve Covers on 460 EFI Center Bolt Heads
With
GASKET
LOK
Feature.
INCLUDES STAINLESS STEEL BOLTS, WASHERS ,and SPACERS.
SOLD IN SETS (TWO ADAPTORS)
Made in the U.S.A. from 100% U.S.A. Billet Aluminum
Head Shown in photo for illustration purposes only not included in Sale.
Some information about installing our valve cover spacers.
IF you are using a aftermarket aluminum head with a good machined valve cover surface many people (including myself ) just silicone the spacer to the head .
IF you are using a cast aluminum valve cover & it is good, flat & straight in the gasket surface then just use Silicone (form-a-gasket) between the spacer &valve cover.
IF your Head is as cast and rough we recommend using a gasket between the spacer and the head.
I
F you are using a tin valve cover (once again MUST be flat) I recommend a gasket between spacer & valve cover.
MOST IMPORANT everything MUST be clean & MUST use a good quality gasket.
The BEST silicone I have found is Ford Motorcraft RTV for use on 7.3 Power Stroke Diesel Engines! Motorcraft Part number (TA31). You can get it at your local Ford Dealer.
We also enclose a information sheet with each set of spacers sold.