NEW Digital Display Lab Electric Overhead Stirrer Mixer Agitator Homogenizer 40L

Description

Store category
Sign Up Now !
You may also like
NEW Digital Display Lab Electric Overhead Stirrer Mixer Agitator Homogenizer 40L
Product Description
shipping notice
Can not ship to Puerto Rico,Alaska/Hawaii
Brand
Unbranded
MPN
Does Not Apply
Large mixing capacity (H, O)
40L
Motor input power
120W
Motor output power
100W
Mixing machine power
130W
Voltage
100-240V
Speed
200-3000rpm
Top-mounted electric agitator, DC permanent magnet motor, low noise, maintenance-free. Smooth start, overload protection, loop protection, adjustable speed, precise and controllable.
Features:
1. Competent for high load
Can work continuously for a long time, outstanding performance.
2. The condensation clamp is wrapped in rubber
The condensation clamp is wrapped with rubber, which increases the friction and effectively clamps the vessel. The torque can be adjusted automatically according to the change of sample viscosity.
3. High and low speed, accurate and controllable
The LCD displays the set value and actual value of the speed, and can monitor the speed and time in real time. The speed range is wide 200-3000rpm, constant speed, high and low speed can be accurately controlled.
Range of use:
It is a good tool for petroleum, chemical industry, metallurgy, textile, food, medicine and health, environmental protection, biochemical laboratory, analysis room, education and research.
parameter:
Large mixing capacity (H, O): 40L
Motor input power: 120W
Motor output power: 100W
Mixing machine power: 130W
Voltage: 100-240V
Speed: 200-3000rpm
Speed display: LCD
Variable speed: 20rpm
Torque: 60 (N / CM)
Overload protection: automatic stop
Maximum viscosity [MPAS]: 50000
Drilling chuck clamping diameter range [VAC]: 0.5-10
DIN EN60589 protection method: IP42
Allowed ambient temperature [° C]: 5-40
Allowed ambient humidity [%]: 80
Steps:
Press and hold the right button to boot, press the set button to select the setting
① Press the set button once, the mode flashes, press the upper and lower two buttons in the middle to select the mode, a total of three modes corresponding to different speed and time.
②Select the mode mode, press the set button again, Rpm flashes and use the up and down keys to set the required speed per minute.
③ After setting the speed, press the set key, Min flashes, use the up and down keys to set the required timing time, after starting, the speed reaches the set speed, and the timing starts timing.
④ Set the above parameters in a certain mode, long press the set key, the screen flashes, indicating that it has been stored in this mode, the next time you only need to select mode to correspond to the set speed and time, press the right button Start and pause, long press the key
Shut down.
Package includes:
1 * Host
1 * Stirring rod
1 * pillar
1 * Thick base
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Feedback
On Jul-06-21 at 00:28:12 PDT, seller added the following information: