IKA EUROSTAR 20 digital (P/N Euro-ST 20 D 8001), 30-2000 RPM, 115 Volt 50/60 HZ

Description

IKA EUROSTAR 20 digital (P/N Euro-ST 20 D 8001), 30-2000 RPM, 115 Volt 50/60 HZ
This is a
IKA EUROSTAR 20 digital (P/N Euro-ST 20 D 8001), 30-2000 RPM, 115 Volt 50/60 HZ
.
What you will get:
IKA EUROSTAR 20 digital (P/N Euro-ST 20 D 8001), 30-2000 RPM, 115 Volt 50/60 HZ
SCREW,SHC, 304,M5X30+ P/N 2664800
SUPPORT ROD,16X220MM
Instruction Manual
This is my item 783.  1 was available at listing time.  No Chuck Key  is included.
Please see the last picture to see how the bar (Called an Support Rod) and screw attach to the mixer.  These parts are new.
More Information:
Laboratory stirrer designed for simple stirring tasks for quantities up to 15 l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.
Digital speed display
Infinitely adjustable speed
Push-through agitator shafts
Overload protection
Short-term overload operation
Slim casing
Quiet operation
Error code display
Stirring quantity max. per stirring position (H2O)
15 l
Motor rating input
70 W
Motor rating output
42 W
Motor principle
Brushless DC
Speed display
LED
Speed range
0/30 - 2000 rpm
Viscosity max.
10000 mPas
Output max. at stirring shaft
42 W
Permissible ON time
100 %
Torque max. at stirring shaft
20 Ncm
Speed control
Stepless
Setting accuracy speed
1 ±rpm
Deviation of speed measurement n > 300rpm
1 ±%
Deviation of speed measurement n < 300rpm
3 ±rpm
Stirring element fastening
Chuck
Chuck range diameter
0.5 - 10 mm
Hollow shaft, inner diameter
11 mm
Hollow shaft (push-through - when stopped)
Yes
Fastening on stand
extension arm (Not Included)
Extension arm diameter
16 mm
Extension arm length
220 mm
Speed control
electronic
Nominal torque
0.2 Nm
Housing material
alu-cast coating / thermoplastic polymer
Dimensions (W x H x D)
86 x 248 x 208 mm
Weight
4.4 kg
Permissible ambient temperature
5 - 40 °C
Permissible relative humidity
80 %
Protection class according to DIN EN 60529
IP 42
Voltage
115 V
Frequency
50/60 Hz
Power input
70 W
Please use the shipping calculator to determine shipping.
Check out my
other items
!
If you receive your item and it is not to your 100 Percent Satisfaction, please contact us before leaving feedback.
I strive to make sure every transaction is a positive one!
IF you have a problem with my item, I would like you to use the "Contact Seller" link in the listing, or call me. Please don't open a case. Cases count against me even if they are resolved.
I stand behind my items and will work out any problems that you may have with an item.
So please contact me if you have a problem with an item I have sold you and don't use the eBay Case as a means of communication.
International Buyers, Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as "gifts". US and International government regulations prohibit such behavior.
Powered by SixBit's eCommerce Solution