DENTEX Dental Ortho Adhesive Kit /Mini/No-Mix Bonding/Light Cure/Blue Glue USA

Description

Introduction
Ship from USA to USA, Ship from China to Other Countries!
INDICATIONS FOR USE:
Direct restoration for all class caries.
Restoration of teeth defect and veneer.
Package:
REFILL:
Light Cure Composite: 4g/Syringe*5
Syringe Needles : 5pcs/ box*1
Total Etching Adhesive: 5ml/Bottle*1
Etching Gel: 2.5ml/Syringe*1
Applicators Brushes: 20pcs/box*1
Net weight: 188.4g
COLOR: A1,A2,A3,A3.5,B1
FEATURES & ADVANTAGES:
Unique dispersion technology ensure the filler evenly distributed
Radioopaque and fluoride releasing Optimal polishability and high shade stability.
Excellent handling, not sticky to instrument;
Suitable for most cases of restoration, extensive indication of usage.
INSTRUCTIONS：
(1)Preparation: isolate and prepare tooth.
(2)Cleaning: rinse the preparation with water.
(3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to
dry for an excessive period of time.
(4)Applying Dentex Self-Etching Light Cure Adhesive (DSA):
dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire
preparation with a little brush until a shiny surface is achieved
and then wait for 10
seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate
the solvent for 5 seconds. (If
using a non self-etching adhesive, an etching step should be
used according to the manufacturer's instruction).
(5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure
surface less than 4 mm.
(6)Applying Dentex light cure composite (DLC): place selected DLC into cavity
preparation following by light cure. According to following
table, the curing time is
recommended for different depth and color shades. In order to reduce shrinkage stress, for
a large cavity, an increment
filling is recommended. In general, 1-2 mm increments are
placed into cavity preparation from different sides and the restoration is built
incrementally. Each increment is light cured for 30 seconds.
(7) Finishing: after light cure, adjust restoration.
(8) Polishing: use polishing strip or disc to polish the surface
WARNING:
Do not use this product for patient who is allergy to methylmethacrylate. Do not use this
product with any material contained eugenol.
PRECAUTIONS:
Methmethacrylate resins may cause skin sensitization in susceptible persons. In case of
contact, wash skin with soap and water. In severe
situation, get medical attention.
ATTENTION:
To an exposed pulp, a pulp capping material such as Calcium hydroxide may be used
before using this product.
STORAGE:
Store at 25℃ or less in a cool and dry place and avoid direct sun exposure.
Recap the syringe after use.
DISPOSAL:
After the product is used up, dispose it as normal medical rubbish.
SHELF LIFE: 3 years
&
Description:
Orthodontic Adhesive: Designed for bonding of metal and ceramic brackets on enamel.
It is of high viscosity and thus prevents bracket drifting and reduces material waste.
As it is light cured extra working time is ensured and therefore accurate bracket placement
c
an be obtained.
INDICATIONS FOR USE: Direct bonding of metal and ceramic brackets
Packing list:
Enamel Adhesive Primer(Total-Etching) 5ml*1 bottle;
Etching Gel 5ml*1 syringe;
Light Cure Adhesive Paste 4g*3 syringe;
Little brush 20;
Syringe tip:10
STORAGE:
Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the
syringe after use.
&
Specifications:
1. This product is one kind of orthodontic direct bonding system resin with aromatic bis
dimethyl acrylate resin as its main material.
2. As a new-type orthodontic direct bonding system, it is convenient to use with little
waste, easy to handle independently and has a favorable
clinical bonding strength.
3. It consists of primer and paste with acid etchant, spatulas and small brusher as its
accessories.
Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate
tooth and blow-dry.
Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and dry
with clean air. If the enamel does not have a chalky
appearance, pls. repeat the process;
Brushing: apply a thin layer of the primer over the etched enamel with the brusher;
Bonding: apply another thin layer of the paste to seal the edges, adjust the bracket within
20 sec, give pressure for 5 to 10 secand remove the
excessive primer and paste after 40 to
60 sec; then do orthodontic procedures followed 5-min curing.
Packaging Detail:
3 x black syringes (3.5g)
1 x primer bottle (10ml)
20 x Brushes
&
Warning:
Ortho-Bonding primer and adhesive contains acrylate monomers. Acrylate monomers are
known to produce allergic skin reactions in certain
sensitive individuals. May cause eye
and skin irritation.
Precautions: A void eye and skin contact. Wear gloves when handing this material.
Precaution:Please follow manufacturer's directions on the handing, proper use and
recommendations for eye protection, when using a curing
light
This system is designed to be used at room temperature (20-25°C, 68-77°F)。
Storage between 2-27°C/35-80°F Light Sensitive
Contents:
3 x Adhesive paste Syringes (10.5g)
1 x Primer Bottle (8ml)
40 x Brushes
1 x Instruction Booklet
&
Specifications:
1. This product is one kind of orthodontic direct bonding system resin with aromatic bis
dimethyl acrylate resin as its main material.
2. As a new-type orthodontic direct bonding system, it is convenient to use with little
waste, easy to handle independently and has a favorable
clinical bonding strength.
3. It consists of primer and paste with acid etchant, spatulas and small brusher as its
accessories.
Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate
tooth and blow-dry.
Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and dry
with clean air. If the enamel does not have a chalky
appearance, pls. repeat the process;
Brushing: apply a thin layer of the primer over the etched enamel with the brusher;
Packaging Detail:
1 x bottle（3ml）Primer
1 x Syringes (3.5g each)Paste
1x Syringes (2.5ml)etchant Gel
7x Brushes
1xSyringe tip
STORAGE:
Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the
syringe after use.
&
Description:
Orthodontic Adhesive: Designed for bonding of metal and ceramic brackets on enamel.
It is of high viscosity and thus prevents bracket drifting and reduces material waste.
As it is light cured extra working time is ensured and therefore accurate bracket placement
can be obtained.
INDICATIONS FOR USE: Direct bonding of metal and ceramic brackets
Feature:
This orthodontic adhesive provides a longer working time and a rapid setting time. Can be
placed directly into bands. Excess flash is easy to
clean up prior to the light curing and the
cement is easy to see due to the blue color.
It contains fluoride to reduce the chance of declacification.
Packing list:
1 x Etchant acid Gel 2.5ml syringe;
1 xLight Cure Adhesive Paste 5g syringe;
1 x Syringe tip
Box size: 17*11*2.5cm
STORAGE:
Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the
syringe after use.
FDA Statement:The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. So you can bid it on this item only if you are an authorized purchaser. If the item is subject to FDA regulation,We have to verify your status as an authorized purchaser of this item before shipping of the item. Thanks for your understanding!
Seller's Name :dentalmed
Telephone Number : 0755-65430522
City : Shenzhen State : China
Payment
We only accept paypal payment
.
The address in your paypal details will be used as the actual shipping
address, please make sure the address is correct. If you are planning on
combining your items, please make sure that you wait until ALL
auctions have ended before you visit the checkout. All items must be
paid within 7 days.
Shipping
T
he goods you ordered will be posted out in the second working day after the payment has been
made.(We will inform you via email if any delay occurred due to holiday events. General shipping time is between 7-12 working days.)After the shipping started, the order will be monitored and the track of the item will
be posted on paypal.
Return
If the item you received is damaged or defective,Please send message immediately.We will free exchange or refund.
We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges.
You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in theoriginal packaging, everything must be in new condition, No missing parts.
Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding!
Feedback
Our goal is to make sure giving you a happy buying experience.
If you are satisfied with our purchasing and our total service, your comment is very important in our business success, pls take a minute to leave us a positive feedback with overall Detailed Selling Rating(DSR) of 5.
If you are not satisfied with your purchase, Pls give us the opportunity to resolve any problem, we understand the concerns and frustrations you might have, and will try our best to resolve the issues
.
About US
If you want wholesale, we can give you a discount, thank you very much.
Our working time: Chinese Beijing time
(Monday- Friday 8:30am -18:00pm)
, because the time zone is different, sorry we cannot give you a reply in time, pls wait for some more time.